Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 45)

CLS-420 Installation Manual 35
5.2.8 Digital Input Menu
The DIG I/O menu shown in Figure 5-12 is used to assign functions to digital inputs.
9999999 9999999 9999999 9999999
%*(*/
0''
%*(*/
;&30
5"3&
/5(34
6/*54
%415"3
13*/5
$-3$/
0''
;&30
5"3&
/5(34
6/*54
%415"3
13*/5
$-3$/
"-(065 %*(*/ 4&51/5 130(3. 1'03.5 4&3*"- $"-*#3 $0/'*( '03."5
)0-% )0-%
,#%-0$ ,#%-0$
7&34
/&8*%
/&8*% $-3"$$
"$$6.
Figure 5-12. DIG I/O Menu
Table 5-9. Digital Input Menu Parameters
DIG IN Menu
Parameter Choices Description
Level 2 submenu
DIGIN1
DIGIN2 OFF
ZERO
TARE
NT/GRS
UNITS
DSPTAR
PRINT
CLRCN
KBDLOC
HOLD
CLRACC
ACCUM
NEWID Specifies the function activated by digital inputs 1 and 2.
• ZERO, NT/GRS (net/gross mode toggle), TARE, UNITS, and PRINT provide the
same functions as the front panel keys.
• DSPTAR displays the current tare value.
• CLRCN resets the consecutive number to the value specified on the CONSTU
parameter (PROGRM menu).
• KBDLOC disables the keypad while the digital input is held low.
• HOLD holds the current display. Releasing this input clears the running average filter.
• CLRACC clears the accumulator
• ACCUM displays the accumulator
• NEWID enters the ID number.