Rice Lake Digital/Diagnostic - iQube - Manual (Page 25)

22 iQUBE Installation Manual
3.4 iQUBE-Specific Menu Structures and Parameter Descriptions
The following sections provide graphic representations of iQUBE -specific 920i menu structures and tables
describing the menu parameters. Default values are shown in bold type; numeric ranges and string values are
shown in italic type. Parameters shown surrounded by a dotted-line box only appear under the special
circumstances explained under each box.
NOTE: Port 3 is the default port for most print formats. If the iQUBE is attached to the 920i using port 3, ensure that the serial
print format is not also routed to port 3. Use the PORT parameter to change the print format serial port assignment.
3.4.1 SERIAL Menu, iQUBE Submenu
Figure 3-2. SERIAL Menu, iQUBE Submenu
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O ALGOUT VERS
PORT 3
CONFIG SECTION CELLS
4/4/4/4
8/8/0/0
4/4/0/0
4/0/0/0
4/4/4/0
8/4/4/0
8/0/0/0
8/4/0/0
CELLA1–
CELLA8
List of Cells
for
CONFIG type
PAIR
CIRC
Same as PORT 3 PROGIN
PLATFM ALGOUT
SOURCE
OFF
FULLSC
CMD
PORT 4
See Port 1–2 Menus
…
SCALE IND SC IQUBE
List of Cells
and Platforms
1–4
300000.0
number ON
See Port 3–4 Menus
TESTCOM
load_cell_ID
ID
capacity
CAPCTY
sensitivity
SENS
75000 3.000000
SRLNUM
serial_number
DIGIO
BIT 1
…
BIT 8
See DIG IO Menu Selections
SYSTEM
List of
Platforms
and Systems
IQDIAG
VALIDAT See IQDIAG
Submenu
PORTTYPE
RS232
RS485