3 pformt menu, Pformt menu, See the – Rice Lake Digital/Diagnostic - iQube User Manual
Page 31: Iqube, 920i, Figure 3-4. pformt menu
Advertising
28
iQUBE
Installation Manual
3.4.3
PFORMT Menu
See the
920i
Installation Manual, PN 67887, for general information about print formats. See Section 7.2 on
page 39 for information about the ALERT print format.
NOTE: Port 3 is the default port for most print formats. If the
iQUBE
is attached to the
920i
using port 3, ensure that the serial
print format is not also routed to port 3. Use the PORT parameter to change the print format serial port assignment.
Figure 3-4. PFORMT Menu
SCALES
SERIAL
FEATURE
PFORMT
SETPTS
DIG I/O
ALGOUT
VERS
GFMT
NFMT
ACCFMT
SPFMT
TRWIN
TRWOUT
TRFMT
Same as GFMT
PORT 4
PORT 1
PORT 3
PORT 2
PORT
FMT
format
HDRFMT1
HDRFMT2
AUXFMT
format
format
ALERT
Same as GFMT
NOTE: Default port for
ALERT format is PORT 1
AUDITFMT
Same as GFMT
Advertising