Rice Lake Digital/Diagnostic - iQube - Manual (Page 39)

36 iQUBE Installation Manual
6.4 Diagnostic Setup
Parameters associated with each of the iQUBE ’s
diagnostic tests can be set using the 920i menus, iRev ,
or Revolution III . See Section 3.4.2 on page 25 for
descriptions of the iQUBE diagnostic parameters for
the 920i .
Figure 6-5. Revolution III Diagnostic Setup Display
6.4.1 Configuring the 920i Diagnostics Softkey
When using the iQUBE with the 920i indicator, a
Diagnostics softkey can be configured to display
diagnostic information when in weigh mode. Use the
FEATURE menu, SOFTKEYS submenu, to select the
Diagnostics softkey (see Figure 6-6).
Figure 6-6. Selecting Diagnostics Softkey
6.4.2 920i Diagnostic Display
Figure 6-7 shows an example of a 920i display of
iQUBE diagnostic information. Information shown
includes the following:
• Cell name
• Cell deadload value (mV)
• Current individual cell and total values (mV)
• Number of weighments
• Cell status for highlighted cell. Use the
indicator navigation keys to select cells.
NOTE: Displayed deadload and current values are raw
millivolt values. All diagnostic measurements use
corrected mV values:
corrected_value = current_value – deadload_value
Figure 6-7. 920i Diagnostic Display
The 920i diagnostic display can be shown by pressing
the Diagnostic softkey (if configured).
In setup mode, diagnostic information can be shown
by going to the VERS menu., pressing the
Contact
softkey, then the Next softkey.
Access through the VERS menu also displays
softkeys for
Clear Diagnostics and, if cell emulation is
enabled, Cell Emulation . If cell emulation is set to
AUTO2 or MANUAL2 (see page 27), a Snapshot
softkey is also shown.
6.5 Error Messages
Table 6-3 shows the alert system status messages
generated by the
iQUBE .
Error messages are displayed on the indicator and can
be used by print formats and
iRite user programs.
Scale
Number Status Message
Cell Error
Messages Cell ID
Scale x System boundary error:
Weighing error:
Master error: Error 1 Cell
Error 2 Cell
Error 3 Cell An,Bn,Cn
,Dn
Table 6-3. Alert Error Message Format