B&C Technologies IM Series Industrial Ironer - Manual (Page 11)

Chapter 2
Important Instructions
2.1 Before Attempting Repairs
Rollers and other moving parts can cause serious injury or death. Before attempting repairs,
follow proper shutdown procedures, remove power, and allow the machine to fully cool before
commencement of service. Before electrical service begins, allow at least 5 minutes after power
has been removed to allow the AC inverter drive to discharge.
Safety is of primary concern with any maintenance or repair operation. If you are in any way
unsure of how to proceed with a repair or adjustment, consult this manual, a qualified mainte-
nance technician, your local distributor, or the B&C Technologies Technical Service Department at
850-249-2222.
Only trained and experienced personnel should attempt maintenance or repair work on this equip-
ment. Follow all safety procedures including lock-out/tag-out procedures carefully. Ensure that
any loose fitting clothing or jewelry is tucked in or not worn to avoid being pulled into the ma-
chine. Remember, the machine has no brain - you must use your own.
Before attempting repairs, follow proper shutdown procedures, remove power, and allow the ma-
chine to fully cool before commencement of service. Before electrical service begins, allow at least
5 minutes after power has been removed to allow the AC inverter drive to discharge.
1