B&C Technologies IM Series Industrial Ironer - Manual (Page 89)

_____________________________________________________________________
Revision Number: 1
Revision Date: 09/18/07 3 of 4 Paratherm HE
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Almost water white before use
Odor: none
pH: NA
Density: 7.18 lb/gal @ 75 ºF
Flashpoint: > 440ºF Cleveland Open Cup
Vapor Pressure: <1mm @70F
Vapor Density (Air = 1): >1
Evaporation Rate (BuAc = 1): <1
Boiling Point: >500ºF
Solubility: Insoluble in water.
Pour Point: -10ºF
SECTION 10 STABILITY AND REACTIVITY
Chemical Stability: Stable under normal storage and handling conditions.
Conditions to Avoid: None
Incompatibility With Other Materials: May react with strong oxidizing agents.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition Products: None known.
SECTION 11 TOXICOLOGICAL INFORMATION
Acute Toxicity:
Meets IP346 criteria of less than 3% PAH. No other data available. Not known to have any toxic effects.
Carcinogenicity:
NTP: No
IARC: No
OSHA: No
SECTION 12 ECOLOGICAL INFORMATION
Environmental Toxicity: Product is insoluble in water. Aquatic toxicology testing performed in Water
Accommodated Fraction (WAF)
Invertebrates: Water Flea (Daphnia magna) – 100% survival in WAF
Mysid Srhimp (Mysidopsis bahia) – 100% survival in WAF
Fish: Fathead Minnow (Pimphales promelas) – 100% survival in WAF
Biodegradability: Product is not expected to be biodegradable
SECTION 13 DISPOSAL CONSIDERATIONS
Uncontaminated material can be burned for fuel value in an approved facility or can be removed by a licensed
waste oil recycler. Used product that has been contaminated with a regulated material may need to be
incinerated. Refer to state and local regulations for more detailed information.
SECTION 14 TRANSPORT INFORMATION
US DOT: Not regulated
IATA & IMDG: Not regulated
79