B&C Technologies IM Series Industrial Ironer - Manual (Page 45)

7. Open the wax pocket and spread a 10 – 12 inch (25 – 30 cm) wide, 1/8 inch deep band of wax
across the width of the sheet starting from the front edge of the wax pocket.
8. Lay the wax pocket flap down on top of the wax (this prevents too much from getting in the
roll padding).
9. Push the green on button to restart the machine and make sure the roll switches are in the
down position. The machine will start up, lower the rolls and begin pulling the wax cloth
into the first roll.
10. Make sure the wax cloth comes out of the folder evenly - it will be very hot so wear thick
fabric or leather gloves to protect your hands.
11. Take the wax cloth out of the folder and let it rest and cool for a minute to make it safer to
handle.
12. Move the wax cloth back to the front of the ironer. Position the front edge to the left side of
the in-feed and feed the wax cloth again.
13. Again, make sure the wax cloth comes out of the folder evenly - it will be very hot so wear
thick fabric or leather gloves to protect your hands.
14. Take the wax cloth out of the folder and let it rest and cool for a minute to make it safer to
handle.
15. Move the wax cloth back to the front of the ironer. Position the front edge to the right side of
the in-feed and feed the wax cloth again.
16. Again, make sure the wax cloth comes out of the folder evenly - it will be very hot so wear
thick fabric or leather gloves to protect your hands.
17. Take the wax cloth out of the folder and let it rest and cool for a few minutes. When cooled
store the wax cloth either on a hanger bar or folded up inside a steel drum.
Every 4 hours of operation
1. Wait for the ironer to warm up to at least 270 o F (135 o C).
2. Set the blower switch to off and set the speed to 10 to 15 ft/min (3 - 6 M/min).
3. Set the Folder to bypass or a waxing program.
4. Lower the rolls by setting all roll switches to down
5. Feed the wax cloth into of the ironer all the way to the right side with the front edge with the
aluminum scouring pad facing down and the wax flap up do not add wax.
6. Make sure the wax cloth comes out of the folder evenly - it will be very hot so wear thick
fabric or leather gloves to protect your hands.
35