Declaration of conformity, Manufacturer’s declaration – B&C Technologies IM Series Industrial Ironer User Manual
Page 121
22
Please select the applicable declaration on the basis of the
explanations below, depending on the criteria indicated and the
actual delivery situation.
________________________________________________________________________________
Declaration of Conformity
as per EC directive “Machinery“ 98/37/EC
Please note: The declaration of conformity, in combination with the CE symbol, is only valid for
machinery which is operative by itself (i.e. w i t h drive)!
E x a m p l e
Long-coupled pump
Close-coupled version
__________________________________________________________________________
Manufacturer’s Declaration
as per EC directive “Machinery“ 98/37/EC
Please note: The manufacturer’s declaration is only valid for pumps w i t h o u t drive.
Commissioning is prohibited until evidence has been submitted that the drive the
pump is to be assembled with complies with the provisions of EC directive
91/368/EEC. Commissioning is always subject to a declaration of conformity, in
combination with the CE symbol, which has to be issued by the party assembling
the pump with another machine.
E x a m p l e
Long-coupled pump
Close-coupled versio
n
111