B&C Technologies IM Series Industrial Ironer - Manual (Page 96)

Thermia® Oil C
MSDS# 61260E
Version 10.0
Effective Date 07/08/2008
Material Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
5/7
Print Date 07/14/2008 MSDS_US
Water solubility : Negligible.
n-octanol/water partition
coefficient (log Pow) : > 6 (based on information on similar products)
Kinematic viscosity : Typical 30 mm2/s at 40 °C / 104 °F
Vapour density (air=1) : > 1 (estimated value(s))
Evaporation rate (nBuAc=1) : Data not available
10. STABILITY AND REACTIVITY
Stability : Stable.
Conditions to Avoid : Extremes of temperature and direct sunlight.
Materials to Avoid : Strong oxidising agents.
Hazardous Decomposition
Products : Hazardous decomposition products are not expected to form
during normal storage.
11. TOXICOLOGICAL INFORMATION
Basis for Assessment : Information given is based on data on the components and the
toxicology of similar products.
Acute Oral Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg , Rat
Acute Dermal Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg , Rabbit
Acute Inhalation Toxicity : Not considered to be an inhalation hazard under normal
conditions of use.
Skin Irritation : Expected to be slightly irritating. Prolonged or repeated skin
contact without proper cleaning can clog the pores of the skin
resulting in disorders such as oil acne/folliculitis.
Eye Irritation : Expected to be slightly irritating.
Respiratory Irritation : Inhalation of vapours or mists may cause irritation.
Sensitisation : Not expected to be a skin sensitiser.
Repeated Dose Toxicity : Not expected to be a hazard.
Mutagenicity : Not considered a mutagenic hazard.
Carcinogenicity : Product contains mineral oils of types shown to be non-
carcinogenic in animal skin-painting studies. Highly refined
mineral oils are not classified as carcinogenic by the
International Agency for Research on Cancer (IARC).
Other
components are not known to be associated with carcinogenic
effects.
Reproductive and
Developmental Toxicity
: Not expected to be a hazard.
Additional Information : Used oils may contain harmful impurities that have
accumulated during use. The concentration of such impurities
will depend on use and they may present risks to health and
the environment on disposal. ALL used oil should be handled
with caution and skin contact avoided as far as possible.
12. ECOLOGICAL INFORMATION
Ecotoxicological data have not been determined specifically for this product. Information given is
based on a knowledge of the components and the ecotoxicology of similar products.
Acute Toxicity
: Poorly soluble mixture. May cause physical fouling of aquatic
86