B&C Technologies IM Series Industrial Ironer - Manual (Page 62)

Figure 5.12: Measuring Roll Procession
Table 5.5: Roll Procession Chart
Ironer Size Turns Procession Length
mm in
800 10 100-150 4-6
1200 10 150-200 6-8
1. Raise the rolls
2. Place a mark on the edge of each roll, and a corresponding mark on the frame of the machine,
or a strip of metal near the roll, see figure 5.12 on page 52
3. Run the machine so that the first roll rotates 10 complete times, coming to rest at the mark
4. Move to the proceeding roll and measure the distance from the mark on the frame to the
mark on the roll
5. Compare your results to the procession chart in table 5.5 on page 52
To adjust the roll procession:
52