B&C Technologies IM Series Industrial Ironer - Manual (Page 24)

Figure 3.1: Machine Clearances
3.4 Site Requirements
3.4.1 Service Clearance
Figure 3.1 shows the recommended minimum service clearances. The dimensions shown are
needed to adequately service and operate the machine with maximum efficiency. Reducing this
clearance is not recommended. You must allow space around the machine for maintenance.
3.4.2 Floor Requirements
The installation site must have flooring capable of supporting the weight of the machine with-
out flexing. Consult the general specifications in the previous section for specific details on the
machines weight and other technical specifications. No special foundation, grouting, or anchor-
ing is required by the manufacturer, but some shimming may be required so that the machine is
completely level. Always follow local codes when performing a machinery installation. It is the
responsibility of the installer to be familiar with the requirements of local codes.
14