Voip-500, Series phone configuration and operation manual – Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone User Manual
Page 12
VOIP-500
Series Phone
Configuration and Operation Manual
Page 12 of 90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4. Using the Web GUI
This section describes various configurable options available from the Web Interface of the phone. It is the
primary interface for configuring and monitoring the phone. You must assign an IP address (Refer to 4.4.1 IP
Settings) before configuring the features of the phone.
4.1. Web GUI Layout
This section describes the layout of the Web GUI.
Figure 2 Using Web GUI
The Web GUI layout is divided into four sections:
1.
Header:
The Header section displays Talk-A-
Phone Logo and product title “VoIP Phone”. The right side of
the header has the Refresh, Help, and Logout buttons. The Refresh button is used to reload the content
section. The Help button provides help content from the Talk-A-Phone website. The Logout button logs out
the user. The Apply button will not be grayed out if the content pane (3) contains configurable parameters.
The Apply button is used to save configuration changes to phone.
2.
Menu:
The menu page provides links to different menus and submenus available on the phone.
1
3b
2
3a
4
3c