Voip-500, Series phone configuration and operation manual – Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone User Manual
Page 29
VOIP-500
Series Phone
Configuration and Operation Manual
Page 29 of 90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.6.3. Keypad
The Keypad configuration page allows administrator to configure the ke
ypad of the phone for “normal” or
“speed dial” mode. This configuration page is only available for phones with a keypad.
Login → Devices → Keypad
Figure 14 Keypad
– Normal Dial Mode
To configure the Keypad:
1.
Select the dial mode
– Normal Dial Mode or Speed Dial Mode. Normal Dial Mode allows for manual
dialing of an “analog style” phone number. If the phone is off-hook, dialing numbers on the keypad will
place a call after the local inter-digit timer expires (Refer to 4.5.4 Call Parameters: Local Inter-digit Timer).
2.
For Speed Dial Mode, enter the number for each keypad button (0
–9). The number can be in the format of
an analog phone number, an IP address, an alias, or a number@domain. When the phone is taken off-
hook, a call can be placed directly to the number by pressing the corresponding keypad buttons.
3.
Click Apply to save settings.
3
4
1
2