Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 84)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 84 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
++ 1- Enable, the VM play in loop
++
++ VM1PlayToUserInLoop = 0 (Default value)
++
++ Note : Admin can similarly program values for VM #2 to VM #5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VM1PlayToUserInLoop = 0
VM2PlayToUserInLoop = 0
VM3PlayToUserInLoop = 0
VM4PlayToUserInLoop = 0
VM5PlayToUserInLoop = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnBut1CallInitRemote, VMActionOnBut2CallInitRemote
++
++ Description : Configured VM will be played to the guard upon call
++ initiation by the specified button
++
++ Valid values : 1 - 5,Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the
++ user.
++
++ VMActionOnBut1CallInitRemote = Disable (Default value)
++
++Filed name
: VMActionOnAuxIn1ActRemote, VMActionOnAuxIn2ActRemote,
VMActionOnAuxIn3ActRemote
++
VMActionOnAuxIn1DeActRemote, VMActionOnAuxIn2DeActRemote,
VMActionOnAuxIn3DeActRemote
++Valid Value
: Disable , 1-10
++ : 1-5 (for playing of voice message #1 to #5
++ : 6-10 (for stop of voice message play #1 to #5
++ Field name : VMActionOnOutboundCallsAns
++
++ Description : The specified VM will be played to the guard, once the call
++ is being answered by the the guard.
++
++ Valid values : Disable 1 - 5
++ Disable - Diable the option of playing the VM
++ 1 - 5 Specifies the number of the VM which needs to be
++ played to the guard phone, when the call is being
++ answered by guard.
++
++ VMActionOnOutboundCallsAns = Disable (Default value)
++
++ Field name : VM1PlayToGuardOnRemoteKeyCode, VM1StopToGuardOnRemoteKeyCode
++
++ Description : The VM #1 will be played/stopped to the guard, once the
++ configured key is dialed by the the guard.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 4 characters
++ Disable - Disable the field
++ *12# - can be used to either start or stop VM #1 play to
++ guard when dialed from the remote side.