Voip-500, Series phone configuration and operation manual – Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone User Manual
Page 26
VOIP-500
Series Phone
Configuration and Operation Manual
Page 26 of 90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.6. Devices
4.6.1. Buttons
The Buttons configuration page allows for programming of the buttons depending on the device mode.
Login → Devices → Buttons
Figure 12 Buttons
To configure buttons:
1.
Select the button mode for each button you want to configure. The mode for Button #1 is not configurable
and is always set to Autodial.
Buttons #2, #3, and #4 can be configured to Autodial or Hook-switch. Optionally, Buttons #3 and #4 can
be configured as Volume Up/Volume Down/Play Voice Message. The number of buttons available for
configuration will be based on the Device Mode (e.g., Device Mode 2BS will have Button #1 and #2
available for configuration).
3
4
1
4
2(i)
4
2(ii)
4
2(iii)
4