Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 90)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 90 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
Appendix F: Network Port Requirements
The network for VOIP-500 Series phones should allow the following:

IPv4 enabled

Allow the following protocols:
o SIP
o RTP
o HTTP/HTTPS
o SMTP

Routed network

DHCP Server (Optional)
Network elements:

SIP Proxy/Registrar

SIP end points

Layer-2 Switch

WEBS Contact Server
Ports:
The following ports needs to be enabled on the VOIP-500 Series phones and allowed across the firewall and
routers in the network.
Service/Module Port Port Type Mode
HTTP 80 TCP/UDP Inbound
FTP 21 TCP Inbound
SSH 22 TCP Inbound
Paging 5000 UDP Inbound
SIP Signaling 5060 UDP Inbound/Outbound
SIP Secure 5061 UDP Inbound/Outbound
SIP Start RTP 8000 to 65535 UDP Inbound/Outbound
STUN 3478 UDP Inbound/Outbound
WEBS Contact Port 3001 UDP Inbound/Outbound
SMTP Server Port 25 TCP/UDP Inbound/Outbound