Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 80)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 80 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AuxOp1DeActOnRemoteKeyCode = Disable
AuxOp2DeActOnRemoteKeyCode = Disable
AuxOp3DeActOnRemoteKeyCode = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : AuxOp1DeActOnLocalKeyCode,AuxOp2DeActOnLocalKeyCode,
++ AuxOp3DeActOnLocalKeyCode
++
++ Description : Auxiliary Output deactivation on specified local keycode
++
++ Valid values : Disable, Max 8 chars containing 0-9, * and #.
++
++ AuxOp1DeActOnLocalKeyCode = Disable (Default value)
++ AuxOp2DeActOnLocalKeyCode = Disable (Default value)
++ AuxOp2DeActOnLocalKeyCode = Disable (Default value)
++
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AuxOp1DeActOnLocalKeyCode = Disable
AuxOp2DeActOnLocalKeyCode = Disable
AuxOp3DeActOnLocalKeyCode = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : AuxOp1DeActOnHandsetCall, AuxOp2DeActOnHandsetCall,
++
AuxOp3DeActOnHandsetCall,
++ AuxOp1DeActOnBut1Call, AuxOp1DeActOnBut2Call,
++ AuxOp1DeActOnBut3Call, AuxOp1DeActOnBut4Call,
++ AuxOp2DeActOnBut1Call, AuxOp2DeActOnBut2Call,
++ AuxOp2DeActOnBut3Call, AuxOp2DeActOnBut4Call,
++ AuxOp3DeActOnBut1Call, AuxOp3DeActOnBut2Call,
++ AuxOp3DeActOnBut3Call, AuxOp3DeActOnBut4Call,
++
++ Description : Auxiliary Output 1 deactivation on call through Button #1
++ - 4 or handset.
++
++ Valid values : 0 - 3
++ 0- Disable
++ 1- Aux Deactivation when call is initiated through Button
++ 2- Aux Deactivation when call initiated through Button is
++ connected
++ 3- Aux Deactivation when call initiated through Button is
++ disconnected
++
++ AuxOp1DeActOnBut1Call = 0 (Default value)
++
++ Note : Admin can similarly program values for AuxOutput 2 and 3
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AuxOp1DeActOnHandsetCall = 0
AuxOp1DeActOnBut1Call = 0
AuxOp1DeActOnBut2Call = 0
AuxOp1DeActOnBut3Call = 0