Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 49)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 49 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.10.4. Date and Time
The Date and Time page allows you to set the date and time of the phone.
Login → Maintenance → Date & Time
Figure 26 Date and Time Setting
To set the date and time:
1. Select Enable NTP to set the VOIP-500 to use Network Time Protocol.
2. If using NTP, enter the IP Address of the NTP Server.
3. If using NTP, select the Time Zone from the drop-down menu.
4. If manually entering the date and time, enter the Date in MM/DD/YYYY format.
5. If manually entering the date and time, enter the Time in HH:MM:SS 24-hour format.
6. Click Apply to save settings. NTP settings will automatically update the date / time.
1
6
2
3
4
5