Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 83)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 83 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
++ *12# - can be used to either start or stop VM #1 play to
++ user when dialed from the remote side.
++
++ VM1PlayOnRemoteKeyCode = Disable(Default value)
++
++ Field name : VM1PlayOnLocalKeyCode,VM1StopOnLocalKeyCode
++
++ Description : The specified VM will be played/stopped to the user upon
++ dialing the configured keycode from the local keypad.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 8 characters
++ Disable - Disable the field
++ *123456# - can be used to either start or stop VM #1 play to
++ user when dialed from the local keypad.
++
++ VM1PlayOnLocalKeyCode = Disable(Default value)
++
++ Note : Admin can similarly program values for VM #2 to VM #5
++ Avoid using the same keycode for start and stop of the same
++ VM.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VM1PlayOnRemoteKeyCode = Disable
VM1PlayOnLocalKeyCode = Disable
VM1StopOnRemoteKeyCode = Disable
VM1StopOnLocalKeyCode = Disable
VM2PlayOnRemoteKeyCode = Disable
VM2PlayOnLocalKeyCode = Disable
VM2StopOnRemoteKeyCode = Disable
VM2StopOnLocalKeyCode = Disable
VM3PlayOnRemoteKeyCode = Disable
VM3PlayOnLocalKeyCode = Disable
VM3StopOnRemoteKeyCode = Disable
VM3StopOnLocalKeyCode = Disable
VM4PlayOnRemoteKeyCode = Disable
VM4PlayOnLocalKeyCode = Disable
VM4StopOnRemoteKeyCode = Disable
VM4StopOnLocalKeyCode = Disable
VM5PlayOnRemoteKeyCode = Disable
VM5PlayOnLocalKeyCode = Disable
VM5StopOnRemoteKeyCode = Disable
VM5StopOnLocalKeyCode = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayToUserInLoop
++
++ Description : The VM #1 will be played to the user in loop
++
++ Valid values : 0 - 1
++ 0- Disable, the VM play in loop