Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 82)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 82 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
AuxOp3DeActOnAuxIn3DeAct = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnBut1CallInit, VMActionOnBut2CallInit ,
++ VMActionOnInboundCallsAns, VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act
++
++ Description : Configured VM will be played to the user upon call
++ initiation by the specified button
++
++ Valid values : 1 - 5,Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the
++ user.
++
++ VMActionOnBut1CallInit = Disable (Default value)
++
++ Field name : VMActionOnInboundCallsAns
++
++ Description : Configuring the specified VM to start playing or stop
++ playing when the inbound calls are answered.
++
++ Valid values : 1 - 10, Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the user.
++ 6 - Stops the VM #1(if playing)
++ 7 - Stops the VM #2(if playing).Similarly the values 8 to 10
++ can be configured to stop the VM #3 TO VM #5
++
++ Note : Admin can similarly program values for VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act on the guidelines
++ for the VMActionOnInboundCallsAns
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VMActionOnInboundCallsAns= Disable
VMActionOnAuxIn1Act = Disable
VMActionOnAuxIn2Act = Disable
VMActionOnAuxIn3Act = Disable
VMActionOnAuxIn1DeAct = Disable
VMActionOnAuxIn2DeAct = Disable
VMActionOnAuxIn3DeAct = Disable
VMActionOnBut1CallInit = Disable
VMActionOnBut2CallInit = Disable
VMActionOnBut3CallInit = Disable
VMActionOnBut4CallInit = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayOnRemoteKeyCode, VM1StopOnRemoteKeyCode
++
++ Description : The specified VM will be played/stopped to the user upon
++ dialing the configured keycode from the remote side.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 4 characters
++ Disable - Disable the field