Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 21)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 21 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.5.3. Audio Settings
The Audio Settings page allows you to configure settings for preferred VoIP codec, enable/disable audio
processing modules, outbound DTMF duration, line level output gain, and the microphone and speaker
parameters.
Login → VoIP → Audio Settings
Figure 9 Audio Settings
To configure audio settings:
1. Select G.711 PCM a-Law @ 64kbps, G.711 PCM u-Law @ 64kbps, G.729A or G.723.1a for the
preferred VoIP codec. The selected codec is used for outgoing call negotiation. (Default is G.711 PCM u-
Law @ 64kbps.)
1
2
3
6
4
4
5