Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 66)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 66 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
Appendix E: Sample Serial Configuration File
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ This Configuration file has all the default and allowed values for
++ configurable attributes.
++ Admin/Programmer can modify the values as per permissible value/range for
++ defined parameters as described in comments given for each parameter.
++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VoIPProtocol
++ Description : Protocol to be used for originating calls
++ Valid values : VoIPProtocol = 1 for SIP (Default Value)
++ VoIPProtocol = 2 for H.323
++ Note : Changing this value will cause the phone to reboot.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VoIPProtocol = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : AutoAnswer
++ Description : Enables/disable auto answer mode of phone operation.
++ Valid values : AutoAnswer = 0 - Disable
++ AutoAnswer = 1 - Enable (Default Value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AutoAnswer = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : OperationPriority
++ Description : Operation Priority between Phone and Paging operations.
++ Valid values : OperationPriority = 1 Phone Mode has priority over Paging
++ Mode(Default)
++ OperationPriority = 2 Paging Mode has priority over Phone
++ Mode
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
OperationPriority = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallerIDPresentation
++ Description : Caller ID presentation to the Remote party.
++ Valid values : CallerIDPresentation = 0 - Disable
++ CallerIDPresentation = 1 - Enable (Default Value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CallerIDPresentation = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallerID
++ Description : Caller ID to be present to Remote Party.