Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 85)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 85 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
++
++ VM1PlayToGuardOnRemoteKeyCode = Disable (Default value)
++ VM1StopToGuardOnRemoteKeyCode = Disable (Default value)
++
++ Note : Admin can similarly program values for VM2 to VM5.
++ Avoid using the same keycode for start and stop of the same
++ VM.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VMActionOnAuxIn1ActRemote = Disable
VMActionOnAuxIn2ActRemote = Disable
VMActionOnAuxIn3ActRemote = Disable
VMActionOnAuxIn1DeActRemote = Disable
VMActionOnAuxIn2DeActRemote = Disable
VMActionOnAuxIn3DeActRemote = Disable
VMActionOnHandsetOffhookRemote = Disable
VMActionOnBut1CallInitRemote = Disable
VMActionOnBut2CallInitRemote = Disable
VMActionOnBut3CallInitRemote = Disable
VMActionOnBut4CallInitRemote = Disable
VMActionOnOutboundCallsAns = Disable
VM1PlayToGuardOnRemoteKeyCode = Disable
VM1StopToGuardOnRemoteKeyCode= Disable
VM2PlayToGuardOnRemoteKeyCode = Disable
VM2StopToGuardOnRemoteKeyCode= Disable
VM3PlayToGuardOnRemoteKeyCode = Disable
VM3StopToGuardOnRemoteKeyCode= Disable
VM4PlayToGuardOnRemoteKeyCode = Disable
VM4StopToGuardOnRemoteKeyCode= Disable
VM5PlayToGuardOnRemoteKeyCode = Disable
VM5StopToGuardOnRemoteKeyCode= Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayToGuardInLoop
++
++ Description : The VM #1 will be played to the guard in loop
++
++ Valid values : 0 - 1
++ 0- Disable, the VM play in loop
++ 1- Enable, the VM play in loop
++
++ VM1PlayToGuardInLoop = 0 (Default value)
++
++ Note : Admin can similarly program values for VM #2 to VM #5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VM1PlayToGuardInLoop = 0
VM2PlayToGuardInLoop = 0
VM3PlayToGuardInLoop = 0
VM4PlayToGuardInLoop = 0
VM5PlayToGuardInLoop = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : KeypadMode
++ Description : Mode of keypad to be used for dialing.