Panasonic KX-F3100 - Manual (Page 114)

Multistation Transmission
By using the built-in memory, you can transmit documents up to 128 stations at a time. This
saves the trouble of sending the same documents to each station in succession.
Multistation transmission is performed by using the direct call stations or speed dial stations.
Before using this feature, make sure that the desired phone numbers have been stored into the
direct call stations or speed dial stations (see pages 81 to 88).
When using this feature, the documents will be scanned and stored into memory first. After
transmission to all stations, the stored documents will be automatically erased .
- Concerning the memory capacity for storing documents, see page 8.
HELPFUL HINT:
- If you lose your instructions while operating, press the HELP button.
The unit will print information on how to operate.
1
2
3
Insert the documents FACE DOWN.
Press MENU until the following is shown.
MULTI XMT MODE
ENTER PHONE NUMBER
Enter the desired phone number by using the direct
call station key or the speed dial station.
ExampleiThe direct call station 8 is dialed.
ENTER PHONE NUMBER
=<S08> [001]
- If you have misdialed, press STOP/CLEAR, then
enter the correct number.
- When entering the phone number by using a full
number, only one station will be acceptable.
112