Important – Panasonic KX-F3100 User Manual
Page 127
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the network passcode
To activate this feature, the identical network passcode must be pre-programmed, both on your
unit and on the other compatible machine(s).
The network passcode should be set any 4-digit number except "0000”.
IMPORTANT:
- The network passcode is pre-programmed to “0000”, which wili not activate the network
communication.
1
2
3
4
5
UEittOnV ffc ’X
directory
[
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 12 to start programming.
NETWORK PASSCODE
=
0 0 0 0
Enter the desired 4-digit passcode (choose 0001 to
9999).
- To correct an error, use the cursor key ( ^ or ► )
to move the cursor to the incorrect number, then
make the correction.
Press SET to store the program into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
125