Display message, Cause & solution, Troubleshooting – Panasonic KX-F3100 User Manual
Page 194: Error display messages
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Error display messages
DISPLAY MESSAGE
CAUSE & SOLUTION
JAN 1 12:00AM 00 QO
CALL SERVICE E12345
JAN 1 12:0QAM 00 00
. - - CHANGE DRUM - -
JMi 1 12:00AM — 00
t CHARGING BATTERY
JAN I 12:00AM 00 00
. - CHECK DOCUMENT -
JAIJ 1 12:00AM 00 00
. - CHECK DOOR
JAN 1 12 ; 00AM 00 00
CHECK DOOR OR DRUM
JAN 1 12:00AM 00 00
CHECK FAX FORWARDING
JAN 1 12:00AM 00 00
- - * CHECK MEMORY - -
'Printing system is abnormal. Open and close the
cartridge compartment cover. If this message still
appears, service cal! will be required.
See page 240.
'The drum unit has reached its life expectancy. Replace
it with a new one. See page 216.
'Once this message has been displayed, the unit can
print approximately 50 more pages.
•
No battery is installed. Install the battery. See page 28.
•
The battery is being charged. Wait for about 5 hours.
•
Battery power is low. Replace the battery with a new one.
See page 218.
•
The document has not been fed into the unit properly, or
the document is electrostatically charged. Re-insert the
document.
If the misfeeding happens frequently, adjust the feed
pressure in the document feeder unit. See page 201.
•
The cartridge compartment cover is open. Close it.
•The printer cover is open. Close it.
• The drum unit is not installed properly. Check it and
re-install. See page 22 or 216.
• Documents that could not be forwarded remain in
memory. Retrieve them by pressing the MENU button
and then the SET button. See page 131.
• Memory (the stored phone numbers, parameters, etc.)
has been erased. Re-program them.
CHECK PAPER SIZE
PRESS MENU KEY
• The unit has been set to print on legal-size paper but
letter size paper has been installed in the paper
cassette. Replace the paper in the cassette with legal-
size paper, then press the MENU button and then the
SET button to print. If you change the paper size setting
by pressing the LEGAL PAPER SUPPLY button, the
first page in memory will not be printed.
CHECK PAPER SIZE
PRESS STOP/CLEAR
• The unit has been set to print on legal-size paper but
letter-size paper has been installed in the paper
cassette. Replace the paper in the cassette with legal-
size paper or change the paper size setting by pressing
the LEGAL PAPER SUPPLY button, then press the
STOP/CLEAR button and then try again.
192