Setting the message alert – Panasonic KX-F3100 User Manual
Page 187
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Message Alert
When the received documents are stored into memory, the unit will alert you if the documents
have been stored. When you hear slow beeps, clear the printing trouble or supply paper to print
documents. The beep sound will stop.
This feature is activated as a pre-selected setting.
To change the setting, proceed as follows:
1
Press MENU until the following is shown.
PROG. [1.DATE 2.TEL
3.SYSTEM 4.REPORT]
2
3
4
-- .. ...... .
Jj 2|
3| O
^ O
8
I #1 6
3 n*'*- S| I 6|
o
PAUSE
O
I"” 7|
1^ 9|
I ^ 1
I # 1 b
Press #, then press 29 to start programming.
MESSAGE ALERT
=ON [1.ON 2.OFF]
Press 2 to de-activate this feature.
MESSAGE ALERT
=OFF [1.ON 2.OFF]
- Press 1 to activate this feature.
Press SET to store your selection into memory.
PROG. [1.DATE 2.TEL
3.SYSTEM 4.REPORT]■
5
Press STOP/CLEAR to end the operation.
185