Notes – Panasonic KX-F3100 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3
Peel off the green tape.
4
Hold the unit firmly, and completely remove the
clear plastic sealing film by grasping it and pulling it
outward.
NOTES:
- Do not twist the sealing film while pulling it,
because toner may spill over.
- Be careful not to make the surrounding area dirty
when handling the sealing film, because it may
contain toner residue.
5
Tap the toner cartridge lightly to empty toner into the
developer unit.
6
Remove the paper backing of the sealing tape
provided, and press this tape over the slot on the
rear side of the toner cartridge.
(continued)
21
Advertising