Czll – Panasonic KX-F3100 User Manual
Page 163
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To change the individual transmission report setting, proceed as follows:
HELPFUL HINT:
- If you lose your instructions while programming, press the HELP button.
The unit will print information on how to program.
1
2
3
4
5
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 04 to start programming.
XMT REPORT =ERROR
[1.ERROR 2.ON 3.OFF]
CZll
I
2
]
3|
Enter the number of the selection you desire.
6
\
o
D o
Setting selections:
1: ERROR (only when any trouble occurred)
2: ON (everytime after transmission)
3: OFF (de-activation of this feature)
Press SET to store your selection into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
161