When receiving a call in the ans/fax mode, When receiving a call in the tel/fax mode, When receiving a call in the fax mode – Panasonic KX-F3100 User Manual

Page 157: When receiving a call in the tel mode, Note, Reserve phone

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Reserve Phone

If you connect a reserve telephone on the same line to which your facsimile unit is connected,

you can make and answer voice calls by using the reserve telephone. You can also initiate fax

reception.
Remember the following notice when using the reserve telephone.

When a call comes in, the reserve telephone will ring according to the setting of the receiving

mode of your facsimile unit as follows:

■ When receiving a call in the

ANS/FAX

mode:

Both the reserve telephone and your facsimile unit ring depending on the setting of the
number of rings in the

ANS/FAX

mode before your facsimile unit automatically switches to

the answering device.
- You can change the ring count. See page 163.

- If you set to “RINGER OFF” in its ring count selection, your facsimile unit will not ring.

But the reserve phone will ring once.

■ When receiving a call in the

TEL/FAX

mode:

Before your facsimile unit rings, the reserve telephone rings depending on the setting of

the number of rings of the reserve telephone.

- You can change the ring count of the reserve telephone. See page 182.
- If someone does not answer the call with the reserve telephone, your facsimile unit will

ring depending on the setting of the silent fax recognition ring (see page 170). In this

case, your facsimile unit will play the greeting message and emit the distinctive tone to

the caller.

- An automatic fax transmission call will be received without ringing after the reserve

phone rings.

■ When receiving a call in the

FAX

mode:

Both the reserve telephone and your facsimile unit ring depending on the setting of the

number of rings in the

FAX

mode before your facsimile unit automatically switches to fax.

- You can change the ring count. See page 162.

■ When receiving a call in the

TEL

mode:

Both the reserve telephone and your facsimile unit continue ringing until someone

answers the call. If someone does not answer the call before the unit rings 15 times, your

facsimile unit will automatically switch to the

ANS/FAX

mode.

If a power failure occurs, your facsimile unit will not function. We recommend using the reserve

telephone as a standard telephone.

NOTE:

- When a reserve telephone is connected to the same line, do not use the reserve telephone

during fax transmission and reception. Otherwise image quality will be affected.

155

Advertising