Panasonic KX-F3100 - Manual (Page 54)

Transmitting Documents
Before transmitting documents
Acceptable documents:
The unit can transmit documents that meet the following conditions:
- Document width should be from 128 to 216 mm (5" to SV^")-
- Maximum document length should not exceed 660 mm {26"').
- Effective scanning width can be up to 208 mm (8^/,/).
- Number of pages that can be set in the document feeder tray must not exceed 20 pages.
- Document weight:
Single sheet: 45 to 90 g/m^ {12 to 24 lb.)
Multiple sheets: 60 to 75 g/m^ (16 to 20 lb.)
Minimum document size Maximum document size Effective scanning width
128 mm
(5")
Unacceptable documents:
216 mm
(8v;')
-208 mm-H
(8^/,;')
Paper width
216 mm {8V/)
The following documents may cause a jam:
- Documents bound with clips, staples, or other similar objects
- Documents on which ink, paste, or correction fluid has not completely dried
Do not use the following types of documents. Make a clear copy of these documents and then
feed the copy into the unit.
- Paper with a chemically treated surface, such as carbon paper or carbonless duplicating
paper
- Electrostatically charged paper
- Heavily curled, creased, or torn paper
- Paper with a coated surface
- Small-sized paper such as a slip or voucher
- Thin paper less than 45 g/m^ {12 lb.)
- Thick paper over 90 g/m^ {24 lb.)
- Paper with faint contrast between the print and the background
- Paper with printing on the reverse side that can be seen through the front (e.g. newspaper)
52