Note, Setting the copy mode, Setting the reduction or inhibition mode – Panasonic KX-F3100 User Manual
Page 173
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Copy Mode
This mode determines how a copy will be reproduced. One of the following three settings can
be selected.
REDUCT: Copies will be reduced to either 86% or 72% of their original length so that they will
fit on one page. If an original is large and can not be reduced to fit on one page, the
unit wiil print the copy on two pages without reduction (pre-selected setting).
INHIBIT:
Copies will not be reduced. The unit will print the copies on two pages without
reduction.
EXTEND: Copies will be extended to 108%, 116%, or 138% of their original length. If a legal-
size original is copied, the copy will be printed on two pages. This mode is useful to
enlarge received documents that have been reduced by the receiving reduction
feature (see page 175).
To make extension copies, see page 173.
Reduction copy
Extension copy
Setting the reduction or inhibition mode
1
2
3
Press MENU until the following is shown.
1
ABC 2
DEF 3
QHI ^
JKL 5
MNO 0
PRS y
TUV 3
WXY 0
*
O
per
Q
#
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 19 to start programming.
COPY MODE=REDUCT
1.REDT 2 -INH 3.EXTND
Enter the number of the selection you desire.
Setting selections:
1: REDT (Reduction)
2: INH (Inhibition)
NOTE:
- To make extension copies by selecting EXTND,
see page 173.
(continued)
171