Notes – Panasonic KX-F3100 User Manual
Page 219
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
4
5
6
Wipe the lens by sliding the cotton swab from end to
end 4 to 5 times.
- It is recommended to clean the inside of the
printer (see page 209).
CAUTION:
- Do not touch the magnet roller.
Open the protective bag by cutting the end of the
bag and remove the drum unit.
Remove the drum protection cap by pushing the
right and left tabs inward.
NOTES;
- Do not touch the green drum surface under the
protection cap as it may damage the drum unit.
- Keep the protection cap in the event that the unit
must be repacked and transported.
Install the new drum unit by holding the green
labeled tabs and pushing it firmly into place.
(continued)
217