Panasonic KX-F3100 - Manual (Page 85)

After storing the numbers, press MENU to end the
operation.
- To transmit documents by one-touch dialing, see
page 97.
- To correct an error while programming before pressing the SET button, press the
STOP/CLEAR button, then try again.
- To cancel the programming halfway, press the MENU button.
- You can confirm that you have correctly stored phone numbers with the telephone number list
(see page 92).
HELPFUL HINT for overseas transmission:
- When storing the phone number, add two pauses at the end of the number by pressing the
PAUSE button {see page 153).
Storing multistations for one-touch dialing
The unit has 5 BROADCAST keys. Each key is used to program and store more than one
station (multistation transmission), as well as a phone number in a direct call station key. This is
very useful when frequently sending the same documents to fixed parties.
If you store the phone number by using a full number, only one station will be acceptable. So,
before you start programming, make sure that the desired phone numbers have been stored
into the direct call stations or speed dial stations (see pages 81 and 85).
The BROADCAST keys can also be used as the direct call station keys 1 to 5, but they cannot
be used for two purposes. For example, if the direct call station number 1 has already been
used for a phone number, it cannot be used as the broadcast number 1.
1
2
7| S| i*^~9|
O
PAUSE
o
0
1
-------- . MUTE
# O
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press 2 to start programming.
SELECT AUTO OR
DIRECT CALL KEY
(continued)
83