Panasonic KX-F3100 - Manual (Page 47)

To set your logo and facsimile telephone number, proceed as follows:
HELPFUL HINT:
- If you lose your instructions while setting, press the HELP button.
The unit will print information on how to set.
1
2
3 OB13B NKKUinaiiiua. M k
rowroi —
E3E1ED o
EUFslEl I
[^E5j[Zl o
ttOnCLI
[5
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press 3 to start programming.
ENTER YOUR LOGO
=Panasonic PPF
- The unit is pre-programmed to “Panasonic PPF"
as your logo.
Enter your logo up to 30 characters by using the
character keys and the cursor key {or ► ).
- For further details on using the character keys, the
command keys, and the cursor key { ^ or ► ),
see pages 47 to 49.
- When the first character is entered, the
pre-programmed logo is cleared.
Example:The logo is “ABC Ltd”.
1 .
2 .
3.
4.
5.
6 .
7.
8 .
Press 2 once to select “A” then ^ .
Press 2 twice to select “B” then ^ .
Press 2 three times to select “C” then ^ .
Press the station number 9 of the direct call
station key to select “space” then ^ .
Press 5 three times to select “L” then ^ .
Press 8 four times to select “ t ” then .
Press 3 four times to select “d” then
.
Press the station number 3 four times to select
“. ” (period).
ENTER YOUR LOGO
=ABC Ltd.
If you make a mistake, use the cursor key { ^ or
^ ) to move the cursor to the incorrect character,
then make the correction.
(continued)
45