Canon 3170 Series - Manual (Page 163)

6-6 Sending Documents Chapter 6
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Selecting a Sender Name
Follow this procedure to select one of the registered sender names.
❏
Sender names are selected by pressing the TTI Selector button.
❏
This setting is optional. If you do not select a sender name before
sending a document, the registered unit name will be printed at the
top of the document in the sender information area. (
➞3-12)
❏
If you select a sender name before you send a document, it will
replace the unit name printed in the sender information area.
(
➞3-12)
❏
Up to 19 sender names can be registered. At least one sender name
must be registered so you can use this feature. (
➞3-18)
1. Set the document on the fax and adjust the document guides to
the width of the document. (
➞6-3)
2. Dial the number.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PRS
JKL
TUV
OPER
M NO
WXY
DEF
Tone
SYMBOLS
Press the buttons on the numeric keypad to dial the number.
-if not-
Press a One-touch Speed Dialing button to dial the number.
(
➞4-29)
-if not-
Press Coded Dial and a three-digit code to dial the number. ( ➞4-31)
-if not-
Use directory dialing. (
➞4-35)
3. Open all three of the One-touch Speed Dialing panels.
TTI Selector
Press TTI Selector until the desired name appears in the display.
-if not-
Press TTI Selector . Then press the search button until the desired
name appears in the display.