Canon 3170 Series - Manual (Page 302)

Chapter 12 Other Special Features 12-15
Other Special
Featur
es
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Feature Menu Item Description of default
Report: Receiving RX REPORT A report is not printed when you receive a fax. However,
you can set the fax to print a report every time you receive
a document or if an error occurs during reception. (
➞16-8)
Restricting use:
DACs, user access
codes RESTRICTIVE
CODES No password or access codes are set on the fax to restrict
sending documents, printing, or using the handset to
make a telephone call. All these functions can be re-
stricted. (
➞13-6, 16-28)
Restricting use:
Stopping junk mail RX RESTRICTION The fax is set to receive all incoming documents. You can
restrict receiving to only numbers registered on your fax
for speed dialing. (
➞13-16, 16-29)
Speed TX START SPEED
RX START SPEED The starting speed for all transactions is set for 33600 bps.
Slower settings are available. (
➞16-30)
Stamp TX STAMP If you have the optional stamp feature on your fax
machine, you can turn the stamp feature on with this
switch. The default setting is off. (
➞12-8, 16-12)
Telephone line TEL LINE TYPE Your fax is set to operate on a touch tone telephone line.
(
➞3-10, 16-6)
Unit Name, Unit
Telephone Number DATE & TIME
UNIT TELEPHONE #
UNIT NAME Your registered identification and fax number are printed
at the top and outside of the image border of every
document you send. This feature is required by Telephone
Consumer Protection Act of 1991 in the United States. Your
number is prefixed with the word “FAX”. (
➞3-12, 16-4,
16-5)
Tel/Fax switching MAN/AUTO
SWITCH You can set a time interval for the fax to wait until it
automatically enters the document receive mode when the
fax is set for manual receiving. (
➞16-14)