Canon 3170 Series - Manual (Page 180)

Chapter 6 Sending Documents 6-23
Sending
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PRS
JKL
TUV
OPER
M NO
WXY
DEF
Tone
SYMBOLS
Set
Use regular dialing with the numeric keypad to dial up to 10
destinations, but make sure that you press
Set after each number
you enter with regular dialing.
You can also press the Redial button to redial the last number
dialed with the numeric keypad.
You must dial the second number within 5 seconds of dialing the first
number. All subsequent numbers must be dialed within 10 seconds. If
you wait longer than the timeout interval before dialing the next number,
the fax will start scanning the document. The timeout interval can be
turned off. (
➞16-11)
3.
Start / Scan
After you have entered all of the numbers, press Start/Scan .
Regardless of the order you used when dialing, the fax will send the
document to the locations you entered in this order: One-touch Speed
Dialing numbers, Coded Speed Dialing numbers, then regular dial
numbers.
To cancel sequential broadcasting
Stop
To cancel a sequential broadcast, press Stop .
After CANCEL DURING TX/RX is displayed, press * . All desti-
nations are canceled.