Canon 3170 Series - Manual (Page 203)

7-16 Receiving Documents Chapter 7
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Transfer Setup Summary (Cont'd)
4.SELECT ORIG UNIT Allows you to set the fax to receive and relay documents
only from originator fax units that you designate.
OFF
All fax transmissions are received and
transferred.
ON The fax machine receives and transfers
transmissions only from fax units that you
designate by fax telephone number.
TEL = Press the One-touch Speed Dialing button or
press the
Coded Dial button followed by the
three-digit code to designate the originator
fax machines for receive and transfer. The
telephone number of the originator fax must be
registered for One-touch or Coded Speed Dialing
on your fax.
5.TIME SETUP* Sets the time to move the fax into and out of the transfer
mode. If you do not set the timer, you can still switch the fax
into the transfer mode manually.
1.START TIME Set a time to move the fax automatically into the transfer
mode.
EVERY DAY : Sets the fax to move into the transfer mode
every day. You can set up to 5 starting times
for every day of the week.
SELECT DAYS 1.SUN to 7.SAT Sets the fax to move into the transfer mode
only on selected days of the week.
: You can set up to 5 starting times for the
selected days.
2.END TIME Sets the time for the fax to leave the transfer mode and
return to the normal mode.
EVERY DAY : Sets the fax to move out of the transfer mode
every day. You can set up to 5 end times for
every day of the week.
SELECT DAYS 1.SUN to 7.SAT Sets the fax to move out of the transfer mode
: on selected days of the week. You can set up
to 5 end times for the selected days.
* The following settings are valid: You can set EVERY DAY for the start time and then use SELECT DAYS to set end times.
You can also set SELECT DAYS for start times and then use the EVERY DAY setting for the end time. However, you cannot
set both EVERY DAY and SELECT DAYS for the start time or end time.