Canon 3170 Series - Manual (Page 414)

Chapter 16 Summary of Important Settings 16-11
Summar
y of
Impor
tant
Settings
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
3.AUTO REDIAL Select whether to perform automatic redial when the other
line is busy or no answer. (
➞6-20)
ON Customize the redial operation.
1. REDIAL TIMES From 01 to 10 times.
(02TIMES)
Even if the fax machine is set to redial several times, it will
redial only once if there is no tone or there is a ring back
tone during the first attempt.
2. REDIAL INTERVAL From 02 to 99 minutes.
(02MIN.)
OFF After the first attempt at dialing fails, re-dialing is not
attempted.
4.BATCH TX If there is more than one document waiting in the memory
to be sent to the same destination, after the timer goes off
ON to send the first document, then all documents are sent
OFF together in the same transmission. With this feature the fax
unit makes one phone call instead of faxing each docu-
ment with a separate phone call. This feature saves time
and money. (
➞16-34)
5.QUICK ON-LINE TX Turn quick memory sending off and on. When ON is
ON selected, the fax unit starts sending the document while it
OFF is still being scanned. ( ➞6-13)
6.TIME OUT Set the interval between dialing (entering phone numbers)
when sending to more than one destination. (
➞6-22)
ON Fax scans the document in 5 or 10 seconds after you enter
the phone number.
OFF Press Start/Scan to begin transmission. Otherwise, the fax
unit returns to standby.