Changing the remote receive id – Canon 3170 Series User Manual
Page 196
Advertising
Chapter 7
Receiving Documents
7-9
Receiving
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Changing the Remote Receive ID
Follow this procedure to change the remote receive ID.
1.
Open the RX SETTINGS menu.
Open all three of the One-touch Speed Dialing panels. Then press
Data Registration
.
Data
Registration
REGISTRATION
1.DATA REGISTRATION
Set
Press
Set
.
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
4.RX SETTINGS
Set
Press
Set
.
RX SETTINGS
1.ECM RX
2.
Press the search buttons until you see the display below.
RX SETTINGS
3.REMOTE RX
3.
Set
Press
Set
.
REMOTE RX
ON
If OFF is displayed, press the search buttons until you see ON.
Advertising
This manual is related to the following products: