Canon 3170 Series - Manual (Page 409)

16-6 Summary of Important Settings Chapter 16
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
7. PROGRAM KEY Use the program button to streamline the procedures for
printing activity reports or doing the scanner settings. (
➞12-5)
PRINT REPORT Press the Program button whenever you need a transmis-
sion report for a document you are sending.
REPORT If you select this setting, you do not have to open all three of
the One-touch Speed Dialing panels to start printing a report.
Whenever you need to print a report, press the
Program
button.
SCANNING MODE Set the scanner buttons (Resolution, Contrast, Document
Type) for special settings, like sending a photograph for
example. Then you can adjust all the settings just by
pressing the
Program button.
STAMP If you have installed the optional stamp feature, this
option is available. If you select STAMP you can turn the
stamp feature on or off without opening all three of the
One-touch Speed Dialing panels to press the
Stamp button.
8. OFFHOOK ALARM Turn the off hook alarm off or on, which alerts you if the
optional handset is not in the handset cradle.
ON Offhook alarm sounds if optional handset or extension
telephone is left off the hook.
OFF No offhook alarm.
9. VOLUME CONTROL Adjust the volume of the fax unit.
1. KEYPAD VOLUME 1 (0 to 3)
2. ALARM VOLUME 1 (0 to 3)
10.TEL LINE TYPE Set the telephone line type. ( ➞3-10)
TOUCH TONE The telephone line is set for touch-tone dialing.
ROTARY PULSE The telephone line is set for rotary pulse dialing. If you
need to dial into an information service that requires tone
dialing, use the
Tone button on the operation panel.
( ➞12-3)