Canon 3170 Series - Manual (Page 322)

Chapter 13 Restricting Use of the Fax 13-19
Restricting Use
of the Fax
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Memory Lock Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.MEM LOCK PASSWORD 0000 to 9999
This password protects the memory lock settings. You must
also use this password to unlock the memory so you can
print documents stored in the memory. Use the buttons on
the numeric keypad to enter a four-digit password and
press
Set .
2.REPORT Set the fax to print reports or not. This setting affects only
reports that print automatically, such as Activity Reports for
sending and receiving, and Activity Management Reports.
OUTPUT NO No report prints while in the memory
lock mode.
OUTPUT YES A report prints while the fax is in the
memory lock mode.
3.TIME SETUP Set the times for the fax to enter and leave the memory lock
mode. The time settings are optional. If you do not set the
times, you can use the
Memory Reception button to turn the
memory lock feature on and off.
OFF Turns off the timer setup. You can turn
the memory lock mode on and off with
the
Memory Reception button.
ON Turns on the timer setup. You can still
use the
Memory Reception button to turn
the memory lock mode on and off.
1. START TIME Sets the time for the fax to enter the
memory lock mode.
EVERYDAY Set the time in 24-hour format. Up to 5
starting times can be specified for every
day or each selected day.
SELECT DAYS
2. END TIME Sets the time for the fax to leave the
memory lock mode.
EVERYDAY Set the time in 24-hour format. Up to 5
starting times can be specified for every
day or each selected day.
SELECT DAYS