Canon 3170 Series - Manual (Page 241)

9-6 Using a Relay Network Chapter 9
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
4.RX PASSWORD 20 digits ( * # spaces)
When your fax is the relay unit, this ITU-T password must match
the ITU-T password of the document sent from the originator in
order for your fax to receive the document. Otherwise, your fax
will not receive the document. Enter a number up to 20 digits long
(it can include spaces and the symbols
* and #).
5.SELECT ORIG UNIT When your fax is the relay unit, this feature forces your fax to
check the identity of the originator before it receives the document
for relay to other units.
ON When your fax receives a document for relay,
it will check the identity of the originator
before it receives the document. In order for
this feature to perform correctly, the telephone
number of the originator unit must be registered
correctly for speed dialing on your fax unit.
TEL = Press the One-touch Speed Dialing button or
press the
Coded Dial button followed by the
three-digit code where the number for the
originator fax is registered and press
Set .
OFF Your fax will receive a document for relay
without checking the identity of the
originator.
6.PRINT RX DOC. When your fax is the relay unit, this setting determines if your fax
unit prints a copy of every document that it relays.
OFF Your fax does not print a copy of every
document it relays to other fax units.
ON Your fax prints a copy of every document it
relays to other fax units.
# OF RX COPIES 01 COPIES If you turn on PRINT RX
DOC., use this setting to
specify the number of copies
you want to print (01-99).
7.SELECT LOCATIONS This item allows you to select the fax units to receive the docu-
ment your unit relays. The number of fax units to receive the document
must be registered for One-touch or Coded Speed Dialing. You cannot
enter a number with regular dialing.
TEL = Close the One-touch Speed Dialing panels and
press the speed dialing buttons where the
numbers of the fax units to receive the relay
broadcast are registered then press
Set . You
can select up to 200 destinations.
Relay Group Setup Summary (Cont'd)