Canon 3170 Series - Manual (Page 450)

Glossary G-3
Glossar
y
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
D
Default
The fax is programmed in the factory with settings that we recommend.
These are known as factory default settings. You can customize your fax
by programming settings other than the factory default settings. For
details, see Chapter 16 of this Facsimile User’s Guide.
Delayed transmission
With delayed transmission (also called timer sending), you can set a time
for the document to be sent. You do not have to be in the office when the
document is sent at the specified time. With delayed transmission you
can send the same document to more than one destination at a preset
time. If you frequently send the same document to several destinations,
you can save time by using Group Dialing.
Density control
You can darken or lighten documents that you send or receive with
buttons at the top of the operation panel.
Destination label
Attachable label used to label speed dialing buttons on the facsimile
machine. Write the name of the other party on the label and then paste
the label above the button where his or her fax number is registered.
Dialing methods
Dialing numbers at the press of one or a few buttons. To use automatic
dialing, you must register the fax numbers in the memory of the machine.
• Regular dialing
• One-touch Speed Dialing
• Coded Speed Dialing
• Group Dialing
• Directory Dialing
Direct sending
Use direct sending if the memory is full but you still want to send a
document. Direct sending scans and sends one page at a time. The
document is not scanned into the memory, so it takes a little more time to
get your original document back.
Document
The single sheet or stack of papers containing the data you want to send
through or receive from a fax machine.