Canon 3170 Series - Manual (Page 204)

Chapter 7 Receiving Documents 7-17
Receiving
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Transfer Setup Summary (Cont'd)
6.PRINT RX DOC. Sets the fax to print a copy of the transferred document at the
transfer unit.
OFF
Received and transferred documents are not
printed at the transfer unit.
ON A copy of every document received and
transferred is printed at the transfer unit.
# OF RX COPIES To enter the number of copies (01-99) use the
numeric keypad to enter the number or
press the search buttons to increase or
decrease the number and press
Set .
Turning the Transfer Mode ON and OFF
You can use this procedure to move the fax into and out of the transfer
mode if the timer has not been set to switch the fax in and out of the
transfer mode automatically. If the timer has been set to move the fax
into and out of the transfer mode automatically, you can still use this
procedure to put the fax in the transfer mode before the timer switches
the fax into the transfer mode.
Turning Transfer Mode ON
Follow this procedure to turn the transfer mode on manually at any time.
1. Open all three of the One-touch Speed Dialing panels. Then press
Transfer .
Transfer
PASSWORD
_
2.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PRS
JKL
TUV
OPER
M NO
WXY
DEF
Tone
SYMBOLS
Set If you have registered a password, use the buttons on the numeric
keypad to enter your four-digit password, then press
Set .
TRANSFER
The fax is now in the transfer mode and will transfer documents
to the destinations you specified in the transfer setup file.