Canon 3170 Series - Manual (Page 242)

Chapter 9 Using a Relay Network 9-7
Using a Relay
Network
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
8.TX REPORT This feature determines if your fax unit returns a relay transmis-
sion report to the originator after your fax unit receives and relays
a document.
TRANSMIT After your fax unit relays a document, it sends
a transmission report back to the originator. In
order for the feature to perform correctly, the
originator’s unit telephone number must be
registered on your fax for One-touch or Coded
Speed Dialing.
NOT No relay transmission report is sent to the
TRANSMIT originator after a document has been relayed.
9.TX START TIME You can set your fax to hold documents and then relay them at a
preset time. If you do not set this item, all documents received for
relay are relayed immediately. If you want to use this feature,
press
Set .
Use the buttons on the numeric keypad to enter the time in 24-
hour format. You can set up to 5 times to relay documents within a
24-hour period every day.
10.RELAY B’CAST This feature switches relay broadcasting for this group on and off
without altering any of the other settings.
ON Your fax unit receives and relays a document
set for relay broadcasting.
OFF Your fax unit will not receive and relay a
document set for relay broadcasting.
Changing the Relay Broadcast Settings
Follow this procedure to change the relay broadcast settings.
❏
If you want to add to the list of fax units to receive relay broadcasts
from your fax unit, make sure that the numbers you want to add are
registered for One-touch or Coded Speed Dialing.
❏
If you want to set your fax unit to confirm the identity of the origina-
tor before it receives a document for relay broadcasting, make sure
the telephone number of the originator’s fax unit is registered for
One-touch or Coded Speed Dialing on your fax unit.
Relay Group Setup Summary (Cont'd)