Canon 3170 Series - Manual (Page 240)

Chapter 9 Using a Relay Network 9-5
Using a Relay
Network
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
2. Give the relay group a number from 00 to 99.
Set
Press Set .
SETUP FILE
SET RLY TX GROUP# 00
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PRS
JKL
TUV
OPER
M NO
WXY
DEF
Tone
SYMBOLS
Set
Use the buttons on the numeric keypad to enter the two-digit
relay group number and press
Set .
SETUP FILE
1.GROUP DIAL NAME
Use the search buttons to display all the items in the menu.
Set
With the item displayed that you want to set, press Set . Then
follow the instructions in the table below to set up the relay group.
Stop
When you are finished, press Stop .
Relay Group Setup Summary
The default settings, shown in bold, remain in effect unless you change
them.
1.GROUP DIAL NAME Name (24 characters)
Enter a name for the relay group. The name can be up to 24-
characters long. Then press
Set .
2.PASSWORD 0000-9999
A four-digit password protects the relay box settings you are
about to set up. After you set a password, you will have to enter it
every time you want to view or change these settings. Enter a
four-digit password and press
Set .
3.SUBADDRESS 20 digits ( * # spaces)
This is the ITU-T subaddress. Enter a number up to 20 digits long
(it can include spaces and the symbols
* and #).