Canon 3170 Series - Manual (Page 385)

15-34 Maintenance & Frequently Asked Questions Chapter 15
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
3. Locate the stamp pad then apply only one drop of ink to the
stamp ink compartment.
❏
To avoid a malfunction, do not add too much ink.
❏
Use only Shachihata X Stamper Ink CS-20 Yellow.
❏
Do not use the stamp feature for at least one hour. If you have
to send a document, turn off the stamp feature for the first
hour. (
➞12-10)
TO AVOID INK SPILLAGE, APPLY ONLY ONE DROP OF INK TO
THE STAMP PAD.
4. Follow steps 10 to 12 on pages 15-32 and 15-33 to close the ADF
cover, lower the document feeder tray, and connect the power cord
of the fax unit to the power source.
• Make sure that you do not drip ink on any other part of the fax.
• Make sure that you put the plastic loop back in place when you close
the ADF cover. (
➞15-33)