Toa M-864D Ver.2.2.0 - Manual (Page 110)

110
12.4. Maintenance window
Select [Option Maintenance] from the Menu view to display the Maintenance window.
12.4.1. Maintenance window (when the real time Log tab is selected)
Log data saved into the unit and newly issued log data can be retrieved and viewed in real time by starting the
automatic refresh function while connected to the M-864D unit.
Displayed log data can be saved in a CSV file through the operation of the [File Save] button.
(1) Automatic refresh/Refresh stop button
(3) Time (day.hh:mm:ss) (4) Event (5) Contents (6) Counter (7) Status time
(2) File Save button
1. automatic refresh/refresh stop button
Starts or stops the real time log update while
connected to the M-864D unit.
2. file Save button
Stores log data in a CSV file while in refresh stop
mode.
3. time (day.hh:mm:ss)
Displays the lapse time after the M-864D has been
powered on.
• Display example when the lapse time is less than
one day
[03:22:11] 3 hours 22 minutes and 11 seconds
• Display example when the lapse time is one day
or more
[12.11:02:32] 12 days 11 hours 2 minutes and
32 seconds
4. event
Displays event types when operation through the
front panel, contact inputs, or the ZM Remote
controller operation is made. (Refer to the table on
the next page.)
5. Contents
Displays the contents of the event. (Refer to the
table on the next page.)
6. Counter
Displays the serial numbers to be recorded into the
M-864D unit.
7. Status time
Displays the receipt time of the log.
Note: Displays the time of PC's internal clock when
receiving log data while the PC and M-864D
are online.
tip
Newly retrieved log data is automatically scrolled on the screen when the latest data is kept displayed in
automatic refresh mode enabled in the Real time log tab.